In The Mail Monday: Zipit

Just a short post to hold you over until I can sit down and write something meaningful.  Yes, I've been doing things and taking pictures.  I just need to sit down and share it with you.

I occasionally buy zippers for projects.  For my money, the best price, service and selection is through Zip It on Etsy.  I can never buy just a couple of zippers, either.  I always end up with at least 25 zippers in a multitude of colors.  So, the next time you need a zipper, or 25 or 50, check out Zip It.

The small print:  I wrote this because I am legitimately happy with the price, service and selection I receive when shopping with Zip It.  I was not compensated for these statements.  Excuse me, I have zippered pouches, bags and stuff to make.

Piecing a Quilt Back

When I picked the fabrics for this quilt, I decided to use this 2 yard cut I picked up in the discontinued section of my local quilt shop.  I bought it for quilt backing but for a much smaller quilt.

After I had I pieced the quilt top and realized I would have to add something to the backing fabric to make it big enough.  Pieced backings are a great way to use up some of those orphan blocks and add some visual interest to the back of your quilt.

I had several leftover blocks, so those were pieced together to be inserted.  This part is very straight-forward; just regular piecing. Let's go over how I pieced rest of the quilt back.  (For the record, this is not the only way to do this.  This is MY way of doing it.) There are very specific reasons I piece my backings this way. 

To keep these long cuts (about 2 yards long) straight, I tear my fabric.  Cut a 1" snip about 12" from the selvage edge.  (I never remove the selvages from the outside edges of the quilt back before quilting, I'll go over this more later.)  Tear the fabric from this snip the length of the fabric.

When I measured my row of blocks, it was long enough for the quilt, but just a little bit shorter than the rest of the backing fabric.  I pieced in some muslin just so it would match up.  This muslin is well into the excess (meaning waste that will be cut off after quilting but is required for loading onto the frame) for this backing.

Since I ripped the fabric, I put in a much wider seam allowance.  For smaller piecing I don't mind the 1/4", but for those long seams I think a seam allowance of 1/2" to 5/8" is more appropriate. 

These wide seams get pressed open.  These are the only seams I press open.  I am trusting the light scrim on the back of my batting to help prevent bearding through these seams.  I know some people press all their seams open, but I don't for 1/4" seams.  I don't think it makes a strong enough seam when it is pressed open and I don't care for pressed fingers.

With my row of blocks stitched in, I tested against the top.  There were some choice words and a long sigh when I realized I was still about 3" too narrow.  If I was not my own long arm quilter this would have been more like 9" too short, but I'll cover that another time.  I had to come up with another 3-4" of backing fabric with seam allowance.

I had about 1/4 of a yard of this turquoise fabric and a trimmed off 2" strip of the chevron fabric.  I decided to sew those two together and then trim the 10" by width-of-fabric piece into 4.5" rectangles.  Then, I sewed them together into one long strip.  I really like this detail.  The chevrons just peek out of that bold, solid strip.

I repeated the process of tearing for the other side.  This is where it comes down to personal preference.  I put the first one in at around 12" from the selvage edge.  I did the same with the second insert, but I could have put it much closer to the first.  Don't be afraid to vary this to create a pleasing backing.  Just avoid getting too close to the edges (to me, anything 6" or less is too close).  I always make sure I have a nice solid piece along the edges.  I don't want to have too many seams along the edges that might interfere when I go to attach the binding.

Again, I used a 1/2" seam allowance and pressed open.

Once it was all pressed from the back, I turned it over and pressed from the front.  Remember, if you can't press it out it isn't likely to get quilted out.

This is what it looked like before I pinned it to the leader for quilting.  Let's talk about those selvages for a little bit.  As you can see, I left them on through the quilting process.  Why?  Well, I have yet to meet a cut edge that is as stable as the selvage.  The selvage won't fray or stretch and is sturdier than the rest of the fabric. This means I have a stable and straight edge to pin to my leaders. I don't square up my backings.  I just make sure the two sides, those with the selvages, are parallel and I have enough extra (6-8") on either end for the clamps.  Besides, I know the selvage is waste, why not use it my advantage so I can start my quilting as close to the usable fabric edge as possible and cut down on waste.   

Piecing tips:

• always match the length of fabric or width of fabric (warp and weft), most fabric stretches much more along the width than the length
• sew longer seams before cutting (I sewed the chevron strip to the turquoise before cutting), it is easier to press and trim to size than it is to cut and sew to size
• tear fabric to keep long edges straight, your ruler can't slip if you tear and this doesn't need to be exact
• pressing towards the smaller or larger piece may be easier than the dark side, use your best judgement
• keep most piecing seams away from the edge of the backing to cut down on too many seams building up at the edges
• leave the selvage on to keep that stable edge to attach to the quilt frame leaders

If you have any questions about how or why I piece my backs the way I do, please ask.  If you want to know why I load the quilt frame the way I do, I'll be doing another post to talk about that.  If you want to know about long arm quilting service, just leave a comment and as long as you are not a "no-reply-blogger" I will get back to you through email.

Charity Quilting: Minnie

I have several quilt tops made by other members of the Annapolis Quilts for Kids chapter.

On Tuesday, I loaded up the long arm and got quilting.  I've had a couple of these charity quilts waiting to be quilted.  A basting stitch to keep everything stable for quilting.  I used Magnifico for the top thread.  I love the shine this poly thread gives to the finished piece.  It is also a very strong thread.

I did a fun clam motif in the outer border.  The inner border was treated as one area with the main body of the quilt.

 The blocks were treated as one big area and quilted the same.

These flowers built on a center swirl were used to fill in the entire center space of the quilt.  This is one of my favorite motifs and is great for filling space quickly and adding loads of texture.

I think the two motifs really bring this little quilt alive.  After trimming I will send the quilt to another member of the Annapolis Quilts for Kids for the binding to be attached.

Triple-Zip Pouch Fun with Thing 1 & Thing 2

I found the Triple-Zip Pouch and knew it would be a great fit to use up some of my zippers.  The prices through ZipIt are just so good I can't help myself and always order way more than I need for a project.  If you decide to do a project with a bunch of zippers, I highly recommend you check out the store.  

I pulled all of the Dr. Seuss fabrics I had for this project.  I never went out of my way to buy these.  They all showed up in one big box of remnants or another.  I was pretty pleased that I had enough to make something with.

This is just an overview of how I put my bag together, not a tutorial.  For that, you should totally go check out A Quilter's Table for all the down and dirty details.  Besides, I went off-pattern from the first cut.  The first thing I did, other than cut my fabrics much bigger, was to change out that one dark zipper for a white zipper.  It seems selecting zippers in bad lighting could lead one to use a purple zipper where a navy zipper would be more appropriate.  Since I didn't have a navy zipper, the white got put in there.  I wanted this bag to have a strap, so that's where that long strip of yellow fabric comes in.  It is made like most fabric bag straps and even has some batting inside to give it more weight.  This was a great project to use up those smaller pieces of fusible batting you don't want to throw away.

I attached the ends for the zippers a little differently, but the result is still the same.  My way actually takes longer, but I like the precision it provides without pinning.

I had to pay close attention to the construction every step of the way for this one.  It wasn't hard once I got the hang of it, but I wanted to make sure I knew what was going on with each additional zipper.  The directions were easy to understand and likely saved me from making an error or two along the way.

The only part that was a little unclear was when I went to stitch up the bag and the lining.  It wasn't difficult, but since I've sewn more than one bag shut without a (non-destructive) way to get it turned right-side out (don't forget to open that zipper!) I was a little concerned.  It all worked out in the end.  I may have to take some pictures when I make the next one in an attempt to make it easier for me to repeat the process.

This bag was fun and I know I'll be making at least a couple more.  I do have an abundance of zippers.

Look at those happy Things!